Titan
|
TI-1A
|
|
|---|---|
 |
|
| General Data | |
| 'Mech Type | BattleMech |
| Class | ASSAULT |
| Weight | 100T |
| Stock Role | Prototyped Juggernaut |
| Stock Specifications | |
| Hardpoints | |
| Speed | 3/5/0 |
| Firepower | Max Damage: 406 Max Stability: 128 Max Heat: 0 |
| Durability | Armor: 1520 Structure: 766 |
| Heat Efficiency | Sinking: 88 Alpha: 154 |
| Melee | Kick: 100 Punch: 50 |
| Stock Equipment | |
| Engine | Standard Engine |
| Core | 300 |
| Heat Sinks | Heat Sink Kit (SHS) |
| E-Cooling | +2 |
| Gyro | Standard Gyro |
| Structure | Titan Reinforcement (Fixed) |
| Armor | Standard Armor |
| Center Torso | SRM6 |
| Left Torso | Heat Sink Heat Sink Heat Sink PPC Ammo SRM Ammo SRM SRM4 SRM4 |
| Right Torso | Heat Sink Heat Sink Heat Sink PPC Ammo SRM SRM4 SRM4 |
| Left Arm | M Laser M Laser M Laser |
| Right Arm | M Laser M Laser M Laser |
| Left Leg | Heat Sink Heat Sink |
| Right Leg | Heat Sink Heat Sink |
Description
Prototyped for General Aleksandr Kerensky towards the end of the Star League, the Titan TI-1A was lost during that government's fall. Rediscovered later by the Federated Suns, it wasn't put into production at first due to limited capabilities in the Succession Wars. However, it eventually found its way back to the battlefield. Armored with 19 tons of armor and made with standard inexpensive components, the Titan is a fairly economical assault for the modern era. Armed with a dizzying array of weapons (2 PPCs, 6 Medium Lasers, 4 SRM-4s, 1 SRM-6) the Titan can smash just about anything to bits.
Bonuses
Mech Quirk: Reinforcement
50% resistance against critical hits
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
- Federated Suns (Davion)
- Federated Suns (Davion)
- Davion Assault Guards
- Free Worlds League (Marik)
- Free Worlds League (Marik)
- 1st Knights of the Inner Sphere
- 2nd Free Worlds Guards
- The 331st Royal BattleMech Division
- Dark Caste
- Word of Blake
- Word of Blake
- 9th Division III-Gamma
- WoB Protectorate Militia
|
|
TI-1G
|
|
|---|---|
|
|
|
| General Data | |
| 'Mech Type | BattleMech |
| Class | ASSAULT |
| Weight | 100T |
| Stock Role | Upgraded Juggernaut |
| Stock Specifications | |
| Hardpoints | |
| Speed | 3/5/0 |
| Firepower | Max Damage: 320 Max Stability: 70 Max Heat: 0 |
| Durability | Armor: 1480 Structure: 766 |
| Heat Efficiency | Sinking: 84 Alpha: 88 |
| Melee | Kick: 100 Punch: 50 |
| Stock Equipment | |
| Engine | XL Engine |
| Core | 300 |
| Heat Sinks | Heat Sink Kit (DHS) |
| E-Cooling | +2 |
| Gyro | Standard Gyro |
| Structure | Titan Reinforcement (Fixed) |
| Armor | Standard Armor |
| Left Torso | Heat Sink (D) Heavy PPC |
| Right Torso | Heat Sink (D) Heavy PPC |
| Left Arm | Silver Bullet Gauss Ammo Silver Bullet Gauss Ammo Silver Bullet Gauss |
| Right Arm | Silver Bullet Gauss Ammo Silver Bullet Gauss Ammo Silver Bullet Gauss |
Description
In a weird quirk of fate, as House Davion started fielding the Titan in the Succession Wars, House Marik discovered that they too somehow had the plans stashed in a bunker somewhere. Though unable to produce it until the 3060s, House Marik designed this, the Titan-1G. Armed with cutting edge weaponry, the Titan-1G proved a solid if unexceptional design for House Marik. Powered by a 300 rated XL engine, the Titan-1G is armed with only four weapons, a pair each of Heavy PPCs for armor cracking and Silver Bullet Gauss Rifles for seeking critical damage against said cracked armor. The combination proved effective, if fairly heat-intensive, and the Titan-1G has found a welcome place in the FWLM.
Bonuses
Mech Quirk: Reinforcement
50% resistance against critical hits
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
- Free Worlds League (Marik)
- Free Worlds League (Marik)
- 1st Knights of the Inner Sphere
|
|
TI-1M
|
|
|---|---|
|
|
|
| General Data | |
| 'Mech Type | BattleMech |
| Class | ASSAULT |
| Weight | 100T |
| Stock Role | Tip of the Spear |
| Stock Specifications | |
| Hardpoints | |
| Speed | 3/5/0 |
| Firepower | Max Damage: 212 Max Stability: 43 Max Heat: 0 |
| Durability | Armor: 1480 Structure: 766 |
| Heat Efficiency | Sinking: 84 Alpha: 92 |
| Melee | Kick: 100 Punch: 50 |
| Stock Equipment | |
| Engine | Standard Engine |
| Core | 300 |
| Heat Sinks | Heat Sink Kit (DHS) |
| E-Cooling | +2 |
| Gyro | Standard Gyro |
| Structure | Titan Reinforcement (Fixed) |
| Armor | Standard Armor |
| Center Torso | MML7 |
| Left Torso | CASE II Ammo LRM Ammo LRM MML9 Ammo SRM Ammo SRM Ammo SRM |
| Right Torso | CASE II Ammo LRM Ammo LRM MML9 Ammo SRM Ammo SRM Ammo SRM |
| Left Arm | Heat Sink (D) M Laser MML9 |
| Right Arm | Heat Sink (D) M Laser MML9 |
Description
Built by House Davion as one of its upgrades to the ancient Titan design after it was put into production, the Titan-1M is armed with a dizzying array of MML launchers, 43 tubes worth in total (four MML 9s and a MML 7). Stuffed full of plenty of ammunition and protected by slabs of armor and CASE II to prevent ammunition explosions, the Titan-1M found success as a tip of the spear design due to its rugged design and simple standard engine. A measly pair of Medium Lasers provide ammo-free firepower, though they are rarely necessary as the Titan-1M usually destroys anything in its path before the Mediums become necessary.
Bonuses
Mech Quirk: Reinforcement
50% resistance against critical hits
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
- Federated Suns (Davion)
- Federated Suns (Davion)
- Davion Assault Guards
|
|
TI-1T
|
|
|---|---|
|
|
|
| General Data | |
| 'Mech Type | BattleMech |
| Class | ASSAULT |
| Weight | 100T |
| Stock Role | Melee Juggernaut |
| Stock Specifications | |
| Hardpoints | |
| Speed | 3/5/0 |
| Firepower | Max Damage: 300 Max Stability: 0 Max Heat: 0 |
| Durability | Armor: 1480 Structure: 766 |
| Heat Efficiency | Sinking: 114 Alpha: 138 |
| Melee | Kick: 100 Punch: 50 |
| Stock Equipment | |
| Engine | Light Engine |
| Core | 300 |
| Heat Sinks | Heat Sink Kit (DHS) |
| E-Cooling | +2 |
| Gyro | Standard Gyro |
| Structure | Titan Reinforcement (Fixed) |
| Armor | Standard Armor |
| Center Torso | Heat Sink (D) |
| Left Torso | Heat Sink (D) Heat Sink (D) L Pulse |
| Right Torso | Heat Sink (D) Heat Sink (D) L Pulse T.S.M. |
| Left Arm | Heat Sink (D) L Pulse L Pulse |
| Right Arm | Heat Sink (D) L Pulse L Pulse |
Description
Built to smash lesser mechs to dust under its mighty fists, the Titan TI-1T is a bit of an odd duck mech. Unusually for such a heavy design, the Titan-1T is built around close-range firepower which befits its origins as a dueling mech on Solaris VII. Armed exclusively with a whopping six Large Pulse Lasers the Titan-1T is more than capable of shredding anything it comes across. If the pulse lasers fail it though, a series of brutal TSM-powered physical strikes will certainly finish the target off. The Titan-1T found its way onto the mercenary and Periphery markets where it has proven popular with more reckless commanders.
Bonuses
Mech Quirk: Reinforcement
50% resistance against critical hits
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
- Mercenaries
- Solaris VII Mercenary League
|
|
TI-2P
|
|
|---|---|
|
|
|
| General Data | |
| 'Mech Type | BattleMech |
| Class | ASSAULT |
| Weight | 100T |
| Stock Role | Updated Juggernaut |
| Stock Specifications | |
| Hardpoints | |
| Speed | 3/5/0 |
| Firepower | Max Damage: 316 Max Stability: 72 Max Heat: 0 |
| Durability | Armor: 1520 Structure: 766 |
| Heat Efficiency | Sinking: 108 Alpha: 151 |
| Melee | Kick: 100 Punch: 50 |
| Stock Equipment | |
| Engine | Standard Engine |
| Core | 300 |
| Heat Sinks | Heat Sink Kit (DHS) |
| E-Cooling | +2 |
| Gyro | Standard Gyro |
| Structure | Titan Reinforcement (Fixed) |
| Armor | Standard Armor |
| Head | ER S Laser |
| Center Torso | ER M Laser ER M Laser |
| Left Torso | CASE Heat Sink (D) Heat Sink (D) MML9 |
| Right Torso | CASE Heat Sink (D) Heat Sink (D) MML9 |
| Left Arm | ER M Laser Heat Sink (D) Ammo Streak SRM Ammo Streak SRM Streak SRM6 |
| Right Arm | ER M Laser Heat Sink (D) Heavy PPC |
| Left Leg | Ammo LRM Ammo SRM |
| Right Leg | Ammo LRM Ammo SRM |
Description
The Titan II is a BattleMech produced by Kressly WarWorks on Epsilon Eridani for the Word of Blake's Protectorate Militia. Based on the original Star League Titan, the Titan II is a fully upgraded and redesigned war machine. It shares the original's speed and armor at 54 kph and 19 tons respectively. While the Titan II is effective at all ranges, it is still reminiscent of its antecedent's role as a brawler. Its main long-range fire comes from a Heavy PPC. This is supplemented by a pair of MML-9s. When it closes with the enemy, the Titan II can cut loose with a Streak SRM-6, four ER Medium Lasers and a single ER Small Laser. 18 DHS generally keep the mech cool.
Bonuses
Mech Quirk: Reinforcement
50% resistance against critical hits
Pilot Affinity: Resistant
50% less chance to suffer critical hits
Factions
- Word of Blake
- Word of Blake
- 9th Division III-Gamma
- WoB Protectorate Militia
|